Model Y Long Range 7SAYGDEE9NF495787

Recall due to the possibility that there may be a software error in the power window system, which may cause, under certain circumstances, a greater force than allowed for the obstacle if the window pane is touched by an obstacle when closed, or a lower opening force when the window pane is reopened (*This may not meet the power window reversal system specific requirements required by FMVSS 118S5 (Automatic Reversal System))

<*Eligible vehicles Production date>

Model 3: 2019.08.01~2022.07.18

Model Y: 2020.12.09~2022.07.20

Firmware update via OTA (Over-the-air)

(Update by going to Control > Software on the touch screen)

(*However, a visit to the service center is not necessary for this corrective action, so please contact the manufacturer's customer center for details.)

Recall due to the possibility that the tail lights may not turn on intermittently due to a vehicle control system software error, and that if the tail lights do not turn on intermittently in a dark environment while driving, the visibility of other vehicles may be impaired and the risk of collision may increase.

Update firmware to version 2022.40.4.1 or later via OTA (over-the-air)

(Update by going to Controls > Software on the touch screen)

<*As this is a firmware update, a visit to the service center is not required for this corrective action.>

Recall due to the possibility that sufficient warning to the driver when using the autosteer function and a device to limit the function when the driver does not actively participate in driving may be insufficient. In such cases, the risk of a collision may increase if the driver misuses the driver assistance function and does not maintain continuous responsibility while driving the vehicle or fails to recognize that the function is activated/deactivated.

<*By target vehicle Production date>

Model S: 2017.03.28~2023.10.20

Model X: 2018.09.14~2023.10.20

Model 3: 2019.07.27~2022.10.05

Model Y: 2020.12.11~2023.11.15

Update to version 2023.44.30 or later via OTA (over-the-air)

1. Apply options to simplify Autosteer activation and deactivation: Activate and deactivate 2 times -> 1 time

2. Improved driver monitoring warning (applies only to Model 3/Y)

- Increased warning notification text size and moved warning screen from bottom to top

3. When Autosteer detects incorrect driver use, Autosteer is suspended for one week

- Model 3Y (model year: 2019-2023)/ SX (model year: 2023) (indoor camera function on): 5 times

​ - Model SX (model year: 2017-2020) (indoor camera function off): 3 times

4. Increased driver monitoring when approaching traffic lights using Autosteer in non-highway areas

If the font size of the Brake, Park, and ABS indicators on the instrument panel is smaller than 3.2mm, it may be difficult for the driver to recognize when the indicator lights are turned on. Recall due to the possibility that this may increase the risk of collision

<*Production date by target vehicle>

Model 3: 2019.07.30~2022.10.04

Model Y: 2020.12.08~2023.01.09

Model X: 2018.09.29~2024.01.30

Model S: 2017.03.26~2024.01.28

Update to version 2023.44.30.13 or later via OTA (over-the-air)

(Model S/X Tegra vehicles update to version 2022.8.10.17 or later

If the driver opens the hood due to software errors and does not detect that the vehicle's locking device is open, the hood may not be notified to the driver. In this case, if the driver drives without recognizing the hood open state, the hood may be fully open and block the driver's view, increasing the risk of collision.

Model Y: 2020.12.08~2024.06.25

Model 3: 2021.01.14~2024.07.10

Model X: 2023.01.11~2024.04.30

Model S: 2023.02.11~2024.04.26

Update to version 2024.20.3 or later via OTA (over-the-air)

(Hood open status detection and driver notification)