Model S Plaid 5YJSA1E64PF511716

Due to an error in the manufacturing process, the angle of the front camera may not meet specifications. In this case, safety and driving assistance functions such as automatic emergency braking, forward collision warning, and lane keeping assist cannot be used without prior warning to the driver, which may increase the risk of collision.

<*Production date by target vehicle>

Model S: 2023 04.11~2023.06.28

Model X: 2023.02.10~2023.07.06

Recall due to the possibility that sufficient warning to the driver when using the autosteer function and a device to limit the function when the driver does not actively participate in driving may be insufficient. In such cases, the risk of a collision may increase if the driver misuses the driver assistance function and does not maintain continuous responsibility while driving the vehicle or fails to recognize that the function is activated/deactivated.

<*By target vehicle Production date>

Model S: 2017.03.28~2023.10.20

Model X: 2018.09.14~2023.10.20

Model 3: 2019.07.27~2022.10.05

Model Y: 2020.12.11~2023.11.15

Update to version 2023.44.30 or later via OTA (over-the-air)

1. Apply options to simplify Autosteer activation and deactivation: Activate and deactivate 2 times -> 1 time

2. Improved driver monitoring warning (applies to Model 3/Y only)

- Increased warning notification text size and moved warning screen from bottom to top

3. When Autosteer detects incorrect driver use, Autosteer is suspended for one week

- Model 3Y (model year: 2019-2023)/ SX (model year: 2023) (indoor camera function on): 5 times

​ - Model SX (model year: 2017-2020) (indoor camera function off): 3 times

4. Increased driver monitoring when approaching traffic lights using Autosteer in non-highway areas

Recall due to the possibility that doors may be unlocked when a vehicle crashes in firmware 2021.36 (September 30, 2021) or later, which may increase the risk of injury to passengers.

<*Production date by target vehicle>

Model S: 2023.04.04~2023.10.20

Model X: 2023.04.04~2023.10.20

Update to version 2023.44.30 or later via OTA (over-the-air)

If the font size of the Brake, Park, and ABS indicators on the instrument panel is smaller than 3.2mm, it may be difficult for the driver to recognize when the indicator lights are turned on. Recall due to the possibility that this may increase the risk of collision

<*Production date by target vehicle>

Model 3: 2019.07.30~2022.10.04

Model Y: 2020.12.08~2023.01.09

Model X: 2018.09.29~2024.01.30

Model S: 2017.03.26~2024.01.28

Update to version 2023.44.30.13 or later via OTA (over-the-air)

(Model S/X Tegra vehicles update to version 2022.8.10.17 or later

In some vehicles, the driver seat detection sensor is not recognized, so the warning sound and visual indicators may not be activated even if the driver is not wearing a seat belt when the engine is started. In this case, recall due to the possibility that the risk of injury may increase in the event of an unexpected accident.

<*Production date by target vehicle>

Model 3: 2018.03.19~2023.05.21

Model Y: 2020.03.21~2023.01.08

Model X: 2022.12.29~2024.01.11

Model S: 2023.02.09~2024.01.17

Update to version 2024.20.3 or later via over-the-air

(Software logic activates seatbelt warning system with driver seatbelt buckle and ignition state instead of driver seated detection)

If the driver opens the hood due to software errors and does not detect that the vehicle's locking device is open, the hood may not be notified to the driver. In this case, if the driver drives without recognizing the hood open state, the hood may be fully open and block the driver's view, increasing the risk of collision.

Model Y: 2020.12.08~2024.06.25

Model 3: 2021.01.14~2024.07.10

Model X: 2023.01.11~2024.04.30

Model S: 2023.02.11~2024.04.26

Update to version 2024.20.3 or later via OTA (over-the-air)

(Hood open status detection and driver notification)