Tesla Model 3 Long-Range Awd 5YJ3E1EB6LF584456

Update firmware to version 2021.43.101.1/2022.04.5 or later via OTA (over-the-air)

(Update by going to Controls on the touchscreen → Software)

Recall due to the possibility that there may be a software error in the power window system, which may cause, under certain circumstances, a greater force than allowed for the obstacle if the window pane is touched by an obstacle when closed, or less open when the window pane is reopened (*This may not meet the power window reversal system specific requirements required by FMVSS 118S5 (Automatic Reversal System))

<*Effective vehicle specific Production date>

Model 3: 2019.08.01~2022.07.18

Model Y: 2020.12.09~2022.07.20

Firmware update via OTA (Over-the-air)

(Update by going to Control > Software on the touch screen)

(*However, a visit to the service center is not necessary for this corrective action, so please contact the manufacturer's customer center for details.)

The cable providing the rear camera image mounted on the Model3 trunk wiring bundle may be damaged when the trunk is opened and closed due to a wiring path design error. As a result, if the trunk lid is repeatedly opened and closed, the rear camera cable in the wiring bundle may be excessively worn over time, causing the rear camera image to not be displayed on the center display, affecting the driver's rear visibility, and the possibility of a rear collision accident when reversing.

After inspection, correct the path of the trunk lid wiring bundle or replace it with a new trunk wiring bundle

When the driver uses the autosteer function, sufficient warning to the driver and a device to limit the function when the driver does not actively participate in driving may be insufficient. In such cases, the risk of a collision may increase if the driver misuses the driver assistance function and does not maintain continuous responsibility while driving the vehicle or fails to recognize that the function is activated/deactivated.

<*By target vehicle Production date>

Model S: 2017.03.28~2023.10.20

Model X: 2018.09.14~2023.10.20

Model 3: 2019.07.27~2022.10.05

Model Y: 2020.12.11~2023.11.15

Update to version 2023.44.30 or later via OTA (over-the-air)

1. Apply options to simplify Autosteer activation and deactivation: Activate and deactivate 2 times -> 1 time

2. Improved driver monitoring warning (applies only to Model 3/Y)

- Increased warning notification text size and moved warning screen from bottom to top

3. When Autosteer detects incorrect driver use, Autosteer is suspended for one week

- Model 3Y (model year: 2019-2023)/ SX (model year: 2023) (indoor camera function on): 5 times

​ - Model SX (model year: 2017-2020) (indoor camera function off): 3 times

4. Increased driver monitoring when approaching traffic lights using Autosteer in non-highway areas

For vehicles with software versions from 2023.32 to 2023.44.30, a software error may occur during factory reset, which may cause the pedestrian warning sound to be muted. If the pedestrian warning sound does not sound from the vehicle when driving at low speeds (approximately 32-33 km/h or less) or when reversing, it may be difficult to make surrounding pedestrians aware of the vehicle's approach, which may increase the risk of collision. Recall

<*Production date by target vehicle>

Model 3: 2019.10.09~2022.01.08

Model Y: 2021.03.31~2021.07.21

Update to version 2023.44.30.14 or later through OTA (over-the-air) (*This action is an update through OTA (over-the-air) and does not require a visit to a service center.)

<*However, For some vehicles, the action may have already been completed and no additional action may be required. For further details, please contact the production company’s customer service center (080-617-1399).>